VGADVI Broadcaster User Guide
5-1 Create Recordings
2. Login as admin.
3. Select
Button Actions
in the Configuration section; the button action configuration page is displayed.
4. Pick
Start Recording
from the
Down
drop-down list for
Right Button
(or Left Button if you prefer to
have the left button start recording).
5. Pick
Stop Recording
from the
Down
drop-down list for
Left Button
(or Right Button if you set the left
button to start recording.)
6. Click Apply.
Control recording with a USB keyboard or mouse
In addition to using the red button or on-device buttons to toggle recording, you can set up custom
configurations that determine how an attached USB keyboard or mouse works to control recordings. By
default the left mouse button or the keyboard Enter key toggles recording in the same way as the default on-
device button behaves. Press and release the button or key once to start recording and again to stop.
The device supports keyboards with media buttons such as Play/Pause and Volume Up/Down or a mouse with
up to three buttons.
When configuring the mouse or keyboard for recording, set the
Down
actions. Down action is chosen so the
recording starts or stops as soon as the button or key is pressed, avoiding any delay that may happen before
the finger is released.
To configure a start recording and stop recording button:
1. Connect to the admin interface using your preferred connection mechanism. See
Connect to the Admin
Interface
.
2. Login as admin.
3. Select
Button Actions
in the Configuration section; the button action configuration page is displayed.
113
