QX1000 Manual III: Extension User's Guide
QX1000’s Feature Codes
QX1000 (SW Version 5.3.x)
8
To terminate the call
Call Park
Dial
to park a call (system will play the SIP username of the first available extension configured for the call parking). Go
to the remote location and call the extension that initiated the call park to pick up the parked call. If enabled, the system will ask for
the password authentication. If successfully entered, the parked call will be resumed.
To use the
Call Park
feature, at least one Call Park extension should be created on the QX1000.
Attention:
The Call Parking is valid within the timeout defined by QX1000’s administrator, during which hold music (if configured)
will be played to the parked party. Contact your system administrator if you need the call parking timeout to be modified. When the
Call Park
timeout expires, a short ring notification will be sent to the phone initiating the call parking, and if no one picks up the
parked call or if the phone is off the hook, the parked call will be automatically disconnected.
Directed Call Park
Hold the current call
(
) and dial the call park extension number within the five second timeout.
Attention:
If the five second timeout is exceeded, then the QX1000 will consider it as an attempt for retrieving the parked call.
Go to the remote location and call the call park extension that initiated the call park to pick up the parked call. If enabled, the
system will ask for the password authentication. If successfully entered, the parked call will be resumed.
To use the
Call Park
feature, at least one Call Park extension should be created on the QX1000.
Attention:
The Call Parking is valid within the timeout defined by QX1000’s administrator, during which hold music (if configured)
will be played to the parked party. Contact your system administrator if you need the call parking timeout to be modified. When the
Call Park
timeout expires, a short ring notification will be sent to the phone initiating the call parking, and if no one picks up the
parked call or if the phone is off the hook, the parked call will be automatically disconnected.
+ Call
Park
Extension
For
PBX services on IP phones accessible during the call
, refer to the “
QX1000 Features on Epygi Supported IP phones
” and “
QX1000
Features on Epygi Tested IP phones
” documents on the Epygi’s Web portal.
Outgoing Call Blocking
Outgoing Call Blocking
(available on the dial tone)
Insert the extension’s password and press
Enable Outgoing Call Blocking
Disable Outgoing Call Blocking
Dial a
Called Number
to be blocked and press
Dial a
Called Number
to be unblocked and press
Forwarding Management
Forwarding Management
(when this menu is accessed, the Unconditional Call Forwarding service
is already getting toggled)
Toggle (enable or disable) the Unconditional
Forwarding service again*
Change the Forwarding Number
Dial a new
Forwarding Number
and press
Confirm the new Forwarding Number with
or press
to dial a new Forwarding Number.
Please Note:
Using the
Change the Forwarding Number
option will change the first entry in the
Unconditional Call Forwarding
table with
Auto
call type to the inserted
Forwarding Number
. Any other entries with
Auto
call type, as well as with other call types will not be modified.
* Besides Any Address/Other Addresses entry of the Unconditional Call Forwarding table this toggling also affects all those entries that have
Toggle
from Handset
option selected. The states of those entries will be set equal to the state of Any Address/Other Addresses entry after toggling.
