EPAK Basic Line TV44, Manual

Page: 59 / 140

Display Problem Remedy
reoccurs several times, call for
technical assistance.)
Err Save Error while saving satellite Repeat search and storing procedure.
Make sure the boat is not moving and
no superstructures obstruct the sight
to the satellite
complete The search for a stored satellite was
successful, but no picture is shown
-
Deactivate Fastscan mode
-
Delete satellite storage positions
and memorize again
Sat
X
interchanging
with
no Sig
No reception of the stored satellite
-
Check if superstructures (e.g.
steeple cab) obstruct the sight to the
satellite - if so, move the boat about
3°
-
Reception can be briefly interrupted
by passing boats
scanning
interchanging
with
complete
No receptable satellite in the entire
search range
-
Select other program on the receiver
and search again.
-
Check, if any superstructures are
obstructing the sight to the satellite
-
Check, by using footprint cards
(e.g. www.satcodx.com), that the
boat is inside the coverage area
(footprint)
Cannot find a satellite
-
Check, if superstructures obstruct
the view to the satellite, and restart
the search mode
Cannot find a stored satellite
-
Check, if superstructures obstruct
the view to the satellite
-
Delete the stored satellite and restart
the search mode
Search for stored satellite takes
longer, even though there are no
obstructions in the view to the
satellite - Modify angles of the satellite at the
new location with the
function
Upd Sat
, see chapter
5.2.
English Page 24 / 34