16
EN
5.2 SteamRock II Basic - position of key components
top view
*The prime heating element (G) has a special colour-coded marking of the connection wire. This
specially marked heating element (G) is located next to the overheating limiter fuse (F). After dis-
connection make sure, that this heating element (G) is connected to the same colour-coded wire.
Incorrect connection may lead to damages to the unit.
D
B
A
C
A
drain line of the pressure relief valve
B
pressure relief valve with drain
C
water supply line
D
descaler liquid supply hose
E
water tank lid
F
tube for overheating limiter fuse (STB)
G
mounting nuts SW 19 and connection terminals for *heating elements
H
rinsing line (high pressure water jet)
I
water level probe (level sensor)
J
steam output pipe with flexible pivot joint
K
chassis (rear side with ventilation holes)
K
J
I
H
G
E
F
example of the 9 kW unit
NOTICE
Summary of Contents for SteamRock II Basic
Page 2: ...2 EN...
