42
EN
9.1 Resetting the safety temperature limiter (STB)
The safety temperature limiter (STB) switches off the heater if the vaporiser tank overheats. To
restart the heater, you must press the Reset button.
CAUTION
Risk of burns from hot parts
The steam pipe on the base plate is very hot.
•
Do not touch the steam pipe.
•
Allow the steam generator to cool down for at least 30 minutes.
•
Wear protective clothing (gloves).
NOTICE
Damage to the safety temperature limiter
The safety temperature limiter can become damaged if you press the Reset button without trou-
bleshooting the cause of overheating. Pressing the Reset button without troubleshooting the cau-
se can damage the safety temperature limiter and can lead to overheating and indirect damages
to the steam generator.
• Troubleshooting and Reset/operation of the safety temperature limiter must be performed only
by qualified personnel..
• Rectify the reason for overheating.
• Allow the steam generator to cool for approx. 30 minutes.
• The Reset button should be operated only by qualified personnel.
Performing a reset
1. Rectify the reason for overheating.
2. Open the housing,, see chapter 5.4.
3. Use a suitable tool to lightly press the Reset button on the safety temperature limiter. If light
pressure is not sufficient, wait until the steam generator has cooled down some more.
4. Close the housing.
5. Restart the unit.
Perform a reset
Summary of Contents for SteamRock II Basic
Page 2: ...2 EN...
