EOS Herkules XL S120 - Installation and Operating Instructions
57
Maintenance
9
Add 8.5 litres of clean water to the vaporiser to flush out the rest of the
mixture.
10
Open the ball valve and allow the 8.5 litres to drain completely. Empty
the container used to collect the water as needed.
11
Close the ball valve.
12
Repeat steps 9 to 11.
13
Attach the small cover panel on the front of the heater.
14
Reposition the holder.
15
Open the shut-off valve to the potable water connection.
16
Connect the heater to the power supply.
6.4 Herkules XL S120 Vapor: cleaning the vaporiser
Typically, it is not necessary to clean the vaporiser if the sauna heater is
used as described in the instructions. Cleaning is only necessary if the
vaporiser has become contaminated or dirty. This can occur if the vaporiser
is not used properly, for example, if additives have been added to the water
in the vaporiser.
Necessary steps:
