12
Installation Instructions - InfraStyle / InfraStyle i
Identification
EN
2.2 Intended use
InfraStyle / InfraStyle i are designed to operate infrared emitters and heat-
ing foils in infrared cabins. The relay box and control panels are intended
only for mounting on the wall.
The SBM-IR module unit must be used in order to operate infrared heating
foils and infrared emitters as add-ons in a sauna cabin. The IR module is
operated together with the relay box for the sauna cabin.
InfraStyle / InfraStyle i is suitable for cabins used in private and commercial
settings.
The control panel is not suitable for outdoor use.
It must be operated only inside buildings and may not be exposed to envi-
ronmental conditions such as extreme humidity and moisture or the possi-
ble formation of condensation or corrosive substances in the ambient air,
as well as other weather conditions. Similarly, excessive cold and extreme
exposure to sunlight must be prevented. Protect the unit accordingly if
there is an increased risk of mechanical damage.
Foreseeable misuse
The following are considered instances of foreseeable misuse:
The infrared heating foils do not have an integrated temperature sensor
with overheat protection.
The control and sensor cable plugs are plugged in incorrectly.
The unit is operated without knowledge of or compliance with the
safety instructions.
Operating, service and maintenance requirements are not observed.
The unit is operated after technical or other modifications are made to
the relay box.
The unit is operated by children or persons with reduced mental capac-
ity or by persons who have not been thoroughly instructed in its use.
