S-Play User Manual
Part No.: 51301
6 March 2021
(v26)
Document ID: 4686708
Page
|64
Using Motion Sensors with the S-Play
Diagram
Steps
1.
Connect a dry input from sensor to Port3 (or any other port), in the GPIO trigger
connector in S-Play.
2.
Connect 0V (GND) from the S-Play GPI through the connector in the S-Play.
3.
Go to web interface:
Go to
Triggers
Create a new entry.
Select Digital Input from
Type
Change to Port 3 in “Ports” (or to the corresponding port the OUT cable was
connected to).
You can use the
Test Trigger
option to ensure functionality.
Click on
Save Trigger
for it to be saved ready for use on the Playlists page.
4.
Navigate to the Playlists Page.
