S-Play User Manual
Part No.: 51301
6 March 2021
(v26)
Document ID: 4686708
Page
|15
Getting Started
Right out of the box, the S-Play is factory configured to:
DHCP –
Allowing you to plug it directly into your existing router and it will receive a
network address.
Output to DMX ports
Update its internal clock based on the NTP server to update the date and time based
on the selected time zone.
To begin your installation please follow these steps:
Unpack the unit from the box. Inspect the S-Play for any damage that might have
occurred in shipping and verify that it looks to be in good condition before plugging it
into power.
S-Play occupies a half width 1RU space, you will need to attach the mounting bracket
kit included in the box to use the S-Play within a half width rack.
Using a Cat5, Cat5e or Cat6 cable, connect the S-Play to an ethernet network.
If the unit is connected to a compatible PoE (IEEE 802.3aF) router or switch skip this
step. Otherwise, use the provided AC->DC power adapter to power up the unit by
plugging it into your mains outlet and the rear of the S-Play.
Once the unit is powered on, you will be able to see its IP address on the LCD display.
The IP address will be automatically assigned by the network, if connected to a DHCP
network. If you are connected to a static network, navigate to the devices settings to
define a static IP address to allow you connect with the unit's web interface.
