S-Play User Manual
Part No.: 51301
6 March 2021
(v26)
Document ID: 4686708
Page
|29
Static Cue
When creating a Static Cue ensure you follow the recording pointers at the beginning of this
section to configure your S-Play correctly.
1.
Select Static Scene as the cue type
2.
Press the ‘Edit scene’ button
3.
Provide cue name to aid identification
4.
Select one of the following options for data capture:
1.
DMX (up to 2 Universes / 1024 Channels)
2.
Art-Net (up to 32 Universes / 16,384 Channels)
3.
sACN (up to 32 Universes / 16,384 Channels)
5.
Specify the universes for capturing data
6.
Once the option for capturing is selected (either manually defined or a live snapshot),
press on the capture button to take a snapshot of your input data at a specific time.
(For Network based protocols sACN/Art-Net sometimes several Captures needed to get
states of all Universes).
Live Preview
– When enabled, the output will be shown live as values are recorded.
Toggle All Inputs
– Selects all input universes
Save Scene
- used to save the cue created
Close
- Close edit window without saving
Preview
– Observe the capture using DMX ports. This will stop any current playbacks
Stop Preview
– Stop output of captured data through DMX ports
The DMX values captured will be shown for the corresponding universe, as shown in the
image below:
