S-Play User Manual
Part No.: 51301
6 March 2021
(v26)
Document ID: 4686708
Page
|57
Factory Reset
A factory reset can be undertaken using either the web interface or LCD providing the user
account is logged in. Performing a factory reset will result in:
The Network settings returning to DHCP
All cues, playlists and schedulers stored internally will be deleted
The output universes will return to Art-Net
Art-Net output will be set to broadcast
sACN output will be set to multicast
Always take a backup before undertaking a factory reset.
Note:
-Once a factory reset has been started the process will not stop until completion.
-Do not remove power from the S-Play whilst a factory reset is in progress.
Following a sucessful factory reset and the S-Play re-booting, ENTTEC recommends removing power for
10 seconds, then re-plugging your device. Once it boots navigate to a 404 page on the device by
modifying the URL to a page that doesn’t exist on the S-Play (i.e.
http://10.0.0.100/en/404/
). This will
automatically clear it’s web cache.
Factory Reset Via LCD
Navigate to settings
Locate Reset to Defaults
Select “RESET”
Factory Reset Via Web Interface
Go to settings page, scroll down to the end of the page and click “Reset to factory Defaults”
