S-Play User Manual
Part No.: 51301
6 March 2021
(v26)
Document ID: 4686708
Page
|24
Settings
The settings page allows the user the following:
Configure Art-Net and sACN output universes and destination IP’s
Configure output protocol refresh rate
Configure DMX output ports
Define the OSC and UDP input port
Set the date, time and location
Change the S-Play’s network configuration
Configure remote access using SSH Tunnelling (Advanced Feature).
Reset to factory defaults
Update firmware
Note:
Do not downgrade firmware version without consulting the ENTTEC support team
first. Downgrading, firmware version may result in playlists, schedules to operate as
intended.