NT INTEGRATED FLOW CONTROLLER WITH DEVICENET COMMUNICATION
11
Entegris, Inc. | User Guide
MECHANICAL INSTALLATION
—
The standard NT Integrated Flow
Controller must be used with the
proper tubing size and fittings.
To prepare the fluid lines, begin by
sliding the supplied nuts onto the
fluid tube.
Prepare Fluid Lines
Connect Fluid Lines
NOTE: Flare each tube end prior to
installation onto the valve fitting.
CAUTION! Overtightening of
the nuts will result in damage
to the fittings.
Process
fluid tube
Slide the nut onto the tube
Process
fluid tube
Flare each tube end
prior to installation
