ENSONIQ Avista 7600 User’s Guide
4
DC 15V In
Damper
Soft
Stereo
Output
+
-
MIDI
Thru
Out
In
Contrast
Note:
The rear-panel jacks are also labeled on top of the Avista so that
they can be easily located from the front.
DC 15V In (Power)
To supply power to the Avista, connect the small end of the supplied
power adapter to the Avista’s DC 15V In jack. Connect one end of the
supplied line cord to the adapter, and the other end to a 110-volt
grounded wall outlet.
Warning:
See “Polarization and Grounding” on Page 24.
Stereo Out
The Stereo Output jack allows you to send the Avista’s high-quality
stereo sound output to any pair of line-level inputs such as those found
on a home stereo system amplifier, cassette recorder or mixer. The jack is
intended for use with a “Y” cable that has a stereo 1/4” plug on one
end—the end that connects to the Avista’s jack—and a pair of mono
plugs (RCA-type or 1/4”) at the other end. These cables can be
purchased at most audio/TV supply stores.
Warning:
When connectingthe Avista to a home stereo, set the stereo’s
volume carefully to avoid damaging your speakers.
Note:
The volume of the Stereo Out jack is set at a fixed line level, and is
unaffected by the setting of the Avista’s Volume slider.
Note:
Connecting a cable to the Stereo Output jack does not turn off the
Avista’s built-in speakers.
Foot Pedal Jacks
•
Damper—When a foot switch—such as the supplied foot pedal—is
connected to the Avista’s Damper jack, the pedal acts in the same
manner as a sustain pedal on a piano.
•
Soft—When the foot pedal is connected to the Avista’s Soft jack, the
pedal acts in the same manner as a soft pedal on a piano.
Tip:
The Avista 7600 ships with one foot pedal. You can purchase a
second pedal by calling ENSONIQ Customer Service at 610-647-3930.
Rear-Panel Connections
