ENSONIQ Avista 7600 User’s Guide
6
Listening to the Avista 7600
You can listen to the Avista 7600 through its built-in speakers or by
plugging standard stereo headphones into either of the 1/4” stereo
headphone jacks—labeled “Phones1” and “Phones2”—located below
and just to the left of the lowest key on the keyboard.
Note:
When headphones are connected to either Phones jack, the
Avista’s speakers are turned off so that you can listen privately.
Note:
If your headphones have a stereo mini-plug, you can purchase a
stereo mini-to-stereo 1/4” adapter at many audio supply stores.
Volume Control
To set the Avista 7600’s overall listening level, adjust the position of its
Volume slider.
To turn the Avista 7600 on, press the front-panel Power
button—the display will light and show “Welcome!” To
turn it off, press the button again.
Volume
Tip:
You can also adjust the volume of each sound. See Page 10.
Turning the Avista 7600 On and Off
