ENSONIQ Avista 7600 User’s Guide
24
Do’s:
•
Use high-density (HD) 3.5" disks.
•
Keep your disks and the disk drive clean and free of dust, dirt,
liquids, etc.
•
Label your disks and keep a record of what is saved on each.
Don’t’s:
•
Don’t use single-sided (SD) disks. These disks have not passed
testing on both sides. While a single-sided disk might work with
the Avista 7600, it is possible that you will eventually lose
important data to a disk error if you try using single-sided disks.
•
Don’t put anything other than a disk into the disk drive.
•
Don’t transport the unit with a disk in the drive.
•
Don’t expose disks to temperature extremes. Temperatures below
50˚ F and above 140˚ F can damage the plastic outer shell.
•
Don’t expose your disks to moisture.
•
Don’t subject disks to strong magnetic fields. Exposure to magnetic
energy can permanently damage the information on the disk. Keep
disks away from speaker cabinets, tape decks, power cables, airline
x-ray equipment, power amplifiers, TV sets, and any other sources
of magnetic energy.
•
Don’t eject the disk while the drive is operating.
Clean-Up and Maintenance
Clean the exterior of your Avista 7600 with a soft, lint-free, dry (or
slightly damp) cloth. You can use a slightly dampened cloth (with a
mild neutral detergent) to remove stubborn dirt, but make sure that the
Avista 7600 is thoroughly dry before turning on the power. Never use
alcohol, benzene, volatile cleaners, solvents, abrasives, polish or rubbing
compounds.
Polarization and Grounding
Like many modern electrical devices, your ENSONIQ product has a
three-prong power cord with earth ground to ensure safe operation.
Some products have power cords with only two prongs and no earth
ground. To ensure safe operation, modern products with two-prong
power cords have polarized plugs which can only be inserted into an
outlet the proper way.
