Adjust Headset Ring
When using headset, to avoid missing the call due to the ringer emitted from
receiver of headset, you can change the ringer emitting from either handset
speaker or receiver of headset.
a. Press
MENU
(Right) soft key while the handset is in the standby
mode.
b. Press
5
(Phone Settings), followed by “9” to enter the “Headset
Ring” menu.
c. Select
On
, the ringer will be emitted from the receiver of headset;
If select
Off
, the ringer will be emitted from handset speaker.
Baby Monitor
You can set any one handset as a “baby unit” to monitor the movement of
baby or older person.
When enabling the baby monitor, the “baby unit” will automatically enter the
monitoring mode via 2-way intercom.
For example, if setting handset A as a “baby unit”, when making an intercom
call from handset B, the handset A will automatically enter monitoring mode
without ringing; Also you can hear the all movements around the handset A
via the handset B.
a. Press
MENU
(Right) soft key while the handset is in the standby
mode.
b. Press
4
(Call Settings), followed by
5
to enter the “Baby Monitor”
menu.
c. Press
CHANGE
to switch ON or OFF (default is OFF).
Re: To avoid any disturbance, during the monitoring, the dedicated
handset will not answer any incoming call, except the intercom.
~55~
Summary of Contents for EP902
Page 1: ...User Manual EP902 Digital 2 Line Long Range Cordless ...
Page 2: ...Intentionally left blank 2 ...
Page 22: ...Base Illustration Base unit Diagram 22 ...
Page 24: ... 24 ...
