use
or
key to select line 1 or line 2.
Press
CHANGE
(Left) soft key to change the
dedication handset or group or all handsets.
(4) Press
SELECT
(Left) soft key and enter
Handset ID number or group ID.
(5) Go to item (3) to set another line. To exit the
setting by pressing
BACK
(Right) soft key or
key.
When enter this menu, you must enter handset password first (4 digits).
Re: The default password of handset is “0000”.
Outgoing
1.
Press
MENU
(Right) soft key followed by
4
to
enter the Call Settings mode.
Press
3
to select Call Manager followed by
entering handset’s password (4 digits).
Press
2
or
3
if muti-base is on to select
“Outgoing”. The hanset is able to make outgoing
calls via the desired line of base station
Call Settings:
3.Call Manager
SELECT
BACK
Re
：
Default setting is “Auto”.
Call Manager
3.Outgoing
SELECT
BACK
a. Press
1
to “Auto”.The hanset is able to make
outgoing call via an available line of subscribed
bases automatically.
b. Press
2
to “Manual”. When pressing
key in
standby mode, the handset LCD will show the
available bases,(i.e. 1,2,3,4) and followed by
selecting the line (i.e. 1,2) of the base. Press digit 1,
you can acces to base 1 and select the line 1 or line
2.
c Press
3
to “Pre-define”. Set the specific line and
desired base for making an outgoing call.
Re: If you subscribed more than one base, you can
~52~
Summary of Contents for EP902
Page 1: ...User Manual EP902 Digital 2 Line Long Range Cordless ...
Page 2: ...Intentionally left blank 2 ...
Page 22: ...Base Illustration Base unit Diagram 22 ...
Page 24: ... 24 ...
