EnGenius EP902 User Manual Download Page 20

Page: 20 / 66

26. Change PIN

Allow changing the base PIN which requires entering the “Base Settings”
(

a. Using registered handset to change PIN from

b. Default PIN is “0000”.

c. When entering the Base Settings, PIN is required. Default is “0000”.

27. Auto Hang Up feature

a. Using registered handset from

to turn on/off the Auto

hand up feature.

b. If turning on the feature, the handset will automatically hang up the

call when the far-end hangs up the call.

c. When entering the Base Settings, PIN is required. Default is “0000”.

28. Area Code

The area code function allows calls within local and country area codes
to be dialed without the prefix.
a. Enter

to set the “Local” area code.

b. Enter

to set the “Country” area code.

Re: Up to 3 digits can be entered.

29. Multiple Base setting

Up to 4 base stations can be set in one system.
Re: For best performance, maintain a distance of at least 5 meters

(about 15 feet) between any two base stations.

30. Set Time

The set time function allows user to set date/time to support the DTMF
caller ID (DTMF caller ID doesn’t attach date/time when receiving from
PSTN, using this setting, user is able to review the date/time when the
caller ID received).
a. Enter

to set Base Settings.

b. Press

scrolling key to select desired base station

when Multi-Base is set.

c. Enter Base PIN (Default is “0000”).
d. Enter

to enter Set Time.

e. Enter 6 digits for YY/MM/DD(Year/Month/Day), then enter 4 digits for

hr:mm (Hour

：

Minute)

Press

SAVE

(Left) soft key to finish the setting.

31. Mic Gain

~20~

Summary of Contents for EP902



































































Search results

Summary of Contents for EP902

Reviews:

EnGenius EP902, User Manual, Page: 20 / 66

Search results

Summary of Contents for EP902

Reviews: