EnGenius EP902, User Manual, Page: 36 / 66

that a call is being on hold.
2. If the operation (e.g., call transfer) after putting a call on-
hold fails, the held call may be dropped.
Mute
1. After a link is established, you can press MUTE (Left)
soft key to mute the handset microphone.
00:00:15
MUTE
11
UNMUTE OPTION
L1
2. When mute is active, the other end will not hear your
voice, but still can speak to you.
3. To leave the mute state, press UNMUTE (Left) soft key. Mute is effective
only for the current call.
Do Not Disturb (Silent Ring)
1. Enter the key sequence MENU - 3 - 1 - 1 or MENU - 3 - 1 - 2 ,
then select “Off”. Press SELECT (Left) soft key to
confirm your choice. This will turn off the ringer of
incoming call or intercom call until it is turn on again
from the menu.
Joe
033289289
SILENT
11
L1
2. For temporary silencing the ringer when an incoming
call arrives, press SILENT (Left) soft key.
Key Guard
1. To prevent accidental dialing, you can press MENU
(Right) soft key, then press 1 to select Keyguard
option. The handset keypad is locked. No key entry is
accepted.
Locked
No new calls
UNLOCK
2. To unlock the keypad, press UNLOCK (Left) soft key,
then, within 2 seconds, press the digit
＊
to unlock.
Press * to
confirm unlock
~36~