3. Broadcasting an individual handset
11
PA to HS #12
REDIAL
MENU
12
a. Enter the Handset ID and then press and hold
key.
b. Start to speak the message to be broadcasted once you hear the key
tone; the speakerphone of destination handsets will be opened up, if
it received the voice.
Re: the initiating handset press and hold the
key is needed
during the speaking or broadcasting
c. Release
key to end the broadcasting.
Redial
1. Press
REDIAL
(Left) soft key.
11
EP902
REDIAL
MENU
2. The LCD shows the last phone number dialed. To dial
this number, press
key.
3.
Use
or
key to scroll through the last 10
phone numbers dialed. Select and press
key to
dial the selected number.
Dialed #1:
033289289
OPTION
BACK
[Note] Intercom numbers (Handset ID) are not stored in
the last 10 numbers dialed log.
Receiving a Telephone Call
1. When an incoming call arrives, the LCD will show the
caller ID message, and the ringer will ring or vibrate
unless the ringer has been turned off.
Joe
033289289
SILENT
11
1
L1
2. If the handset is on the charger cradle (ringer will be
temporarily switched to “Ring” if it has been set to
“Vibrate”), lift the handset and press
key to start
conversation.
~33~
Summary of Contents for EP902
Page 1: ...User Manual EP902 Digital 2 Line Long Range Cordless ...
Page 2: ...Intentionally left blank 2 ...
Page 22: ...Base Illustration Base unit Diagram 22 ...
Page 24: ... 24 ...
