press
CHANGE
(Left) soft key to set the Subscribe BS ON/OFF.
Note
:
If set the Subscribe BS ON, that means the handset is able to access
the line of the desired base station, so the handset is able to make
outgoing call or answer incoming call via the desired base station.
On the contrary, if set the Subscribe BS OFF, then the handset can’t
access the line of the desired base station, so the handset isn’t able to
make outgoing call or answer incoming call via the desired base
station.
Incoming
1.
Press
MENU
(Right) soft key followed by
4
to
enter the Call Settings mode.
Press
3
to select Call Manager followed by
entering handset’s password (4 digits).
Press
1
(or press
2
if muti-base is enabled).
Call Settings:
3.Call Manager
SELECT
BACK
a. Press
1
to enable receiving PA On/Off.
Re
：
Default setting is “ON”.
Call Manager
2.Incoming
SELECT
BACK
.
b. Press
2
to enable receiving Line On/Off.
Re
：
Default setting is “ON”.
c. Press
3
to enable receiving Intercom On/Off.
Re
：
Default setting is “ON”.
Press
4
to set Line Dedication.
Re
：
Default setting of line 1 and line 2 are “All
handsets”.
(1) By default all incoming calls will ring all
handsets.
(2) Select one of four bases if more than one base
were subscribed and enter Base PIN code
first(4digits).
Re: The PIN code is for Base Setting. Default
is”0000”.
(3) To dedicate a handset to a specific line, you can
~51~
Summary of Contents for EP902
Page 1: ...User Manual EP902 Digital 2 Line Long Range Cordless ...
Page 2: ...Intentionally left blank 2 ...
Page 22: ...Base Illustration Base unit Diagram 22 ...
Page 24: ... 24 ...