EnGenius EP902 User Manual Download Page 37 | Manualshive

Page: 37 / 66

EnGenius EP902 User Manual Download Page 37

3. Once returning back to standby mode for 15 seconds,

the keyguard will be automatically enabled.

4. Key Guard is in effect until unlocked.

Battery Recharge and Replacement

1. Charge the battery when one or several of the following happen:

a. Phone beeps twice (every 60 seconds in talk mode, every 10

minutes in standby mode).

b. Battery icon is empty.
c. Phone does not respond when a power on/off key

is pressed.

d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.

2. You can replace the handset battery after placing the call-in-progress on

hold and press

key. To retrieve the call on held, press talk key

again after replaced battery and power the handset on..

3. Battery talk time and standby time vary depending on the talk/standby

pattern and the operating distance. Putting the handset back to charger
cradle as often as possible is recommended for best performance.

Use

only manufacturer provided battery and charger!

~37~

«
...
35
36
37
38
39
...
»

Summary of Contents for EP902



































































Reviews:

No comments