EnGenius EP902, User Manual, Page: 9 / 66

Regulatory Information
EP902
This device complies with CE Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including
interference that may cause undesired operation.
1.
This telephone system complies with rules of the EN 301 357-2
(RF)
、
EN 301 489 (EMC)
、
EN 60950 (Safety) and EN 62479 (RF
safety).
2.
The REN is useful to determine the quantity of devices you may connect
to your telephone line and still have all devices ring when your telephone
number is called. In most, but not all, areas the sum of the REN’s of all
devices connected to one line should not exceed 5.0. To be certain of
the number of devices you may connect to your phone line, you should
contact you local telephone company for the maximum REN in your area.
3.
If your telephone equipment causes problems to the telephone network,
the telephone company may ask you to disconnect your phone system
from the line until the problem has been corrected. Consult with your
local phone company for your rights if this happens.
4.
Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
telephone system. Consult with your local phone company for your
rights if this happens.
5.
This telephone system may not be used on coin service provided by the
telephone company. Connection to party lines is subject to state tariffs.
6.
This telephone system has been tested and found to comply with the
limits for rules of the EN 301 357-2 (RF)
、
EN 301 489 (EMC)
、
EN
60950 (Safety) and EN 62479 (RF safety). These limits are designed to
provide reasonable protection against harmful interference in a general
public installation. Operations of these devices may still encounter
interference from/to nearby TV’s, VCR’s, radios, computers, or other
electronic devices. To minimize or prevent such interference, the
~9~