Eng3 NanoVi, User Manual, Page: 18 / 33

18
User-Card-
“Preset”-Mode: Select with the Owner Card and operate with User Card
The device can be set up with a predetermined session time. In this case the session time cannot be freely chosen, only shortened, or
paused.
Selecting: User-Card-
“Preset”-Mode
To select the
User-Card-
“Preset”-Mode
, the top and the lower selector
buttons must show an orange dot. Press button to toggle between orange
dot and no dot (Fig. 8.10).
When the two mode selector buttons are orange, press the “Page up”
button to switch to the
“User Card Request”-Screen (Fig. 8.11).
Take the Owner Card out.
Operating: User-Card-
“Preset”-Mode
To operate in
User-Card-
“Preset”-Mode
the device requires a User
Card.
The “User Card Request”-Screen (Fig. 8.11) shows when a User Card
is required.
A valid User Card must be inserted to operate the device.
If the User Card ID #, which is printed on the User Card, is not identical
with the device ID#, the "Invalid User Card"-Screen (Fig. 8.11.1) will show.
When a valid User Card is inserted the
“Start-Card“-Screen (Fig. 8.12)
shows. The number above the User Card symbol shows the number of
minutes remaining on the User Card.
In
User-Card-
“Preset”-Mode
the session time cannot be modified. The
display shows the pre-set session time.
Start
the session by pressing the Start Button. The session time will count
down and minutes will be deducted from the User Card.
Pause or stop session at any time by pressing the corresponding blue
button in the “Card-Session in Progress”-Screen (Fig 8.13).
Restart sessions or stop session at any time by pressing the
corresponding blue button in the “Card-Session in Pause”-Screen (Fig
8.13.1).
Stopping the session takes you back to the
“Start-Card“-Screen (Fig. 8.12).
Remove the User Card when session is finished. Screen will return to the
“User Card Request”-Screen (Fig. 8.11).
Fig. 8.12: “Start-Card”-Screen in
User-Card-
“Preset”-Mode
Shows remaining minutes on User Card
Display shows pre-set
session time
Input keys and display of the
preset session time
User-Card-
“Preset”-Mode
Selector Buttons
Fig. 8.10: Selected Mode: User-Card-
“Preset”-Mode
Fig. 8.11: “User Card Request”-Screen
(for reference only;
identical to Fig. 8.7)
Pause Button
Stop Button
Fig. 8.13
“Card-Session in Progress”-Screen
in User-Card-"Preset"-Mode
Start Button
Fig. 8.11.1: “Invalid User Card"-Screen
(for reference only;
identical to Fig. 8.7.1)
Fig. 8.13.1 “Card-Session in Pause”-Screen
in User-Card-"Preset"-Mode