Eng3 NanoVi, User Manual, Page: 17 / 33

17
User-Card-"Timer"-Mode: Select with Owner card and operate with User Card
Selecting: User-Card-"Timer"-Mode
To select the
User-Card-"Timer"-Mode , the lower button must show an
orange dot. Press the button to toggle between orange dot and no dot.
When the mode selector button is orange (Fig. 8.6), press the button
“Page up” to switch to the “User Card Request”-Screen
. Take the Owner
Card out.
Operating: User Card Timer Mode
To operate in
User-Card-"Timer"-Mode the device requires a User
Card.
The “User Card Request”-Screen (Fig. 8.7) shows when a User Card is
required.
A valid User Card must be inserted to operate the device.
If the User Card ID #, which is printed on the User Card, is not identical
with the device ID#, the "Invalid User Card"-Screen (Fig. 8.7.1) will
show.
When the valid
User Card is inserted the “Start-Card”-Screen (Fig. 8.8)
shows.
The number above the User Card symbol shows the number of
minutes remaining on the User Card.
Enter the desired session time by using the number keypad, the
minutes entered show in the display. Use “C” to clear entries.
Start
the session by pressing the Start Button .
The session time will count down and minutes will be deducted from
the User Card.
Pause or stop session at any time by pressing the corresponding blue
button in the “Card-Session in Progress”-Screen (Fig 8.9).
Restart sessions or stop session at any time by pressing the
corresponding blue button in the “Card-Session in Pause”-Screen (Fig
8.9.1).
Stopping the session takes you back to the “Start-Card”-Screen (Fig.
8.8).
Remove the User Card when a session is finished. The screen will
return
to “User Card Request”-Screen (Fig. 8.7).
Fig.
8.9.1: “Card-Session in Pause”-Screen in
User-Card-
“Selectable”-Mode
Fig. 8.8: “Start-Card”-Screen in
User-Card-
“Selectable”-Mode
Fig. 8.7: “User Card Request”
-Screen
Fig. 8.7.1: “Invalid User Card"
-Screen
Fig. 8.6: User-Card-"Preset"-Mode is selected
Button for User-Card-
Timer"-Mode
User Card Symbol
Shows balance of minutes on User Card
Start Button
Display shows session time
Fig. 8.9: “Card-Session in Progress”-Screen in
User-Card-
“Selectable”-Mode
Pause Button
Stop Button
Device ID#