Eng3 NanoVi, User Manual, Page: 15 / 33

15
8
Operating with SmartCards
The Owner Card can be used by the device owner to access the four
“Administration”-Screens.
Insert Owner Card when the monitor shows the self-
test is finished in the Initial “Splash”-Screen and the monitor has changed to one of the
three “Start” Screens for
Standard-Mode (Fig. 7.2), for Infinity-Mode
(Fig. 8.4) or the “User Card Request”-Screens (Fig. 8.7) for one of the
two User-Card-Modes .
When inserted, it shows the first “Administration”-Screen, the “Mode Setting”-Screen (Fig. 8.1). In this screen you can select an Operation
Mode, set device preferences, show the rent time (number of minutes of use), and allows you to reset the rent time by pressing the Reset
rent time button.
Pressing the “Page down” button will show the second “Administration”-Screen, the “Programming”-Screen (Fig. 8.16) for User Cards.
Pressing t
he “Page up” button will bring you back.
Owner Card
The Owner Card can be used by the device owner to access the four administration screens.
Insert Owner Card when the monitor shows the self-test is finished
in the “Initial Splash Screen” and the monitor has changed to one of the
three
“Start Screens” for Standard Mode (Fig. 7.2), for Infinity Mode (Fig. 8.4) or the “User card Request Screen” (Fig. 8.7) for the two User
Card Modes (Fig. 8.7, Fig. 8.11).
When inserted, it shows the first administration screen, the
“Mode Setting”-Screen (Fig. 8.1). In this screen you can select an Operation
Mode, set device preferences, show the rent time (number of minutes of use), and allows you to reset the rent time by pressing the Reset
rent time button.
Pressing the “Page down” button will show the second administration screen, the “Programming”-Screen for User Cards. Pressing the “Page
up” button will bring you back to an “Start”-Screen.
Setting Preferences with the Owner Card
Adjust the brightness - of the screen by pressing the appropriate
“+” or “–“ symbols. It is not possible to turn the screen off completely by
repeatedly pressing
the “–“ button.
Setting Operating Modes
With the Owner Card inserted, the first “Administration”-Screen allows you to set the Operation Mode. It can be operated in four different
ways:
Standard-Mode , Infinity-Mode , User-Card-
“Timer”-Mode
, and User-Card-
“Preset”-Mode.
Fig. 8.1: “Mode Setting”-Screen with Owner Card
User-Card-
“Preset”-Mode
: when button is selected and
Session time length is set
Infinity-Mode : when button is selected
Set brightness
User-Cards-
“Selectable”-Mode,
when this button is selected
“Page up” to “Start”-Screen
Rent time
Set tone volume
Selector buttons: for the four different Operation Modes.
Standard-Mode : no button is selected
“Page down” to “Programing”-Screen
for User Card
Reset time