Eng3 NanoVi, User Manual, Page: 16 / 33

16
Standard-Mode: Select with the Owner Card and operate without User Card
Selecting: Standard-Mode
To select
Standard Mode , all three buttons must be deselected, so that no
orange dot appears, as shown to the right. Press the buttons to toggle
between orange dot and no dot.
When
all the mode selector buttons are blank, press the “Page up” button
to switch to the “Start”-Screen in
Standard Mode (Fig. 7.2). Take out the
Owner Card.
Operating: Standard Mode
To operate in Standard-Mode the device does not require a User Card. The device operates as described in Section 7, Operating in
Standard-Mode .
To operate in
Standard-Mode
make sure that all the mode selector buttons are blank and press the “Page up” button to switch to the “Start”-
Screen in Standard-Mode (Fig. 7.2). Take the Owner Card out.
Infinity-Mode: Select with the Owner Card and operate without User Card
Selecting: Infinity-Mode
To select the
Infinity-Mode , the middle button must show an orange dot
in the “ Mode Setting”-
Screen (Fig. 8.3). Press button to toggle between
orange dot and no dot.
When the
Infinity-Mode
Button is orange, press the “Page up button” to
switch to the “Start”-Screen in
Infinity-Mode (Fig. 8.4). Take the Owner
Card out.
Operating: Infinity-Mode
To operate in Infinity-Mode the device does not require a User Card.
Start a session by pressing the
Start
Button and the screen will change in to the “Infinity-Session in Progress”-Screen (Fig 8.5). The timer
counts and displays the total time that the session is running. The device remains on until the Pause or Stop Button is pressed.
Fig 8.5.1: “Infinity-Session in Pause”-Screen
in Infinity-Mode
Fig. 8.4: “Start-Infinity”-Screen in
Infinity-Mode
Fig 8.5:
“Infinity-Session in Progress”-Screen
in Infinity-Mode
Fig. 8.3: “
Infinity-Mode
”
is selected
Figure 8.2:
Select ‘Standard Mode”
Infinity Mode button
Standard Mode:
all selectors are blank
Display shows
session time
Start Button Stop Button
Pause Button