Enerpac SBL1100, Instruction And Maintenance Manual

Page: 94 / 151

Document number: ED. 03622.00.001.R04.ENG
Page 94 of 151
ED.02518.00.001.R08.ENG
Page 94
7.7. Move the load in transversal direction
For moving the load in transversal direction the moving capability of the side shift is applied.
To operate the side shifts simultaneously, proceed as follows:
1. Apply the RCC
2. Verify that all checklists have been completed and
signed off:
x
Appendix A “ Checklist for planning a lifting
operation ”
x
Appendix B “ Checklist for installing the
System ”
x
Appendix C ” Final checks ” .
3. Verify the power status of the battery [F]; see the
figure below.
4. Enable all units; use the buttons [4] “Ram select”.
5. Use [ 9] “side shift” to move the selected side shift
units simultaneously.