Enerpac SBL1100, Instruction And Maintenance Manual

Page: 74 / 151

Document number: ED. 03622.00.001.R04.ENG
Page 74 of 151
ED.02518.00.001.R08.ENG
Page 74
5.11.3. Set up the communication
To set up the communication between the RCC and the four Units to work, proceed as follows.
Reference is made to
x
the controls on the RCC as “ RCC[x] ”.
The layout of the RCC is given on page 81.
x
the Control Panels of the units as “ UNIT[x] ”.
The layout of the control panel is given on page 79.
1. Connect data cables or do not so.
The system will automatically detect their presence.
2.
Ensure that the “Emergency stop” button on the RCC
is in the non-activated position
.
3. Switch the main power switches on the control panels
of all units to “on”.
The “power on” indicator on the control panel of the
Units will be lit.
4. Make sure that the “Emergency stop” buttons on all
u nits’ are in the non -activated position.
The blue indicator should be dimmed.
5. Switch the unit to Remote
6. Select the Units you want to operate with.
The RCC can now detect the units.
If the connection with a unit is fine than the
“emergency active” indicator on the control panel of
that unit is dimmed.