Enerpac SBL1100, Instruction And Maintenance Manual

Page: 105 / 151

Document number: ED. 03622.00.001.R04.ENG
Page 105 of 151
ED.02518.00.001.R08.ENG
Page 105
10.1.2. Tension the driving chains
1. Perform steps [1] .. [3] from section 10.1.1
“ Lubricate the driving chains ” .
x
The gearbox is affixed to the frame of
the unit with 6 bolts which can move in
slotted holes.
x
The bearings of the intermediate shaft
are affixed to the frame of the unit with
6 bolts, which can move in slotted holes
2. Loosen the bolts of the shaft
3. Tension the lower chain.
The slack in the middle of the chain shall be
10 mm. Use hand power.
4. Tighten the bolts of the shaft
5. Loosen the bolts of the gearbox
6. Tension the upper chain until the slack is 10
mm in the middle of the chain. Use hand
power.
7. Tighten the bolts of the gearbox
Caution: tensioning the chains
too tight might harm the
driving mechanism
8. Close the front door
gearbox
shaft