B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
4521
INTRO-1
22 Aug 2011
25-34-80
Use or disclosure of information on this page is subject to
the restrictions in the proprietary notice of this document.
INTRODUCTION
TASK 25-34-80-990-807-A01
1.
General
A. This manual has been prepared to fulfill the requirements of ATA iSpec 2200 for Component
Maintenance Manuals.
B. All procedures established in this manual have been performed and verified acceptable by trained
personnel at B/E Aerospace, Inc. A competent shop mechanic who is unfamiliar with these units
should, with a minimum amount of effort and tools, be able to isolate the problems of a nonfunctional
unit and restore it to service.
C. Procedures are provided for the full range of maintenance and include all the work functions that could
or may be done to the unit throughout its entire service life.
D. A competent shop mechanic should use this manual first to test and isolate a faulty component. The
mechanic should then go directly to the applicable manual subject to effect a repair in the specific
problem area without disturbing other areas.
TASK 25-34-80-990-808-A01
2.
Abbreviation
The following abbreviations may be used in this manual:
TABLE 25-34-80-99A-001-A01
ABBREVIATION
MEANING
ABBREVIATION
MEANING
AC
Alternating Current
KG
Kilo Gram
AMP
Ampere
KPAG
Kilo Pascal Gauge
AR
As Required
LB
Pound
ASSY
Assembly
ML
Milli Liter
°C
Degree Celsius or Centigrade
MM
Milli Meter
CAGE
Commercial and Government Entity
MTOSS
Maintenance Task Oriented
Support System
CM
Centimeter
CMM
Component Maintenance Manual
N-M
Newton Meter
EFF
Effectivity
NO
Number
°F
Degree Fahrenheit
OZ
Ounce
FIG
Figure
PC
Printed Circuit
FT-LB
Foot Pound
PSIG
Pound per Square Inch Gauge
GPM
Gallons Per Minute
REQ
Required
HZ
Hertz
RTD
Resistive Temperature Device
IN
Inch
TTL
Total
INC
Incorporation
VAC
Voltage Alternating Current
IN-LB
Inch-Pound
VDC
Voltage Direct Current
IPL
Illustrated Parts List
