Endura XL150
40150A04
40150A04M
150 (9.5)
96.3%
160˚F
(71˚C)
S
10,000 lb (4536 kg)
M
2000 lb (907 kg)
S
20,000 lb (9072 kg)
M
4000 lb (1814 kg)
283 lb
(128 kg)
257 gal
(973 L)
4”
300 (136)
1097 (498)
Technical Information
- 7 -
Contractor shall install a Endura® XL Hydromechanical Grease Interceptor (HGI), Part No.
40100A04
❑
40100A04M
❑
,
,
,
40150A04
❑
40150A04M
❑
, 4075A04
❑
, 4075A04M
❑
(See page 6 table), and rated to
100GPM
❑
150GPM
❑
75GPM
❑
(Indicate as Applicable) independently
❑
(Tick if required).
72” regardless of the application and when requiring Riser Extension, the installing contractor will extend the opening device according
* PDI G-101 AND NSF ES 15741 APPLICABLE TO 75 AND 100 GPM MODELS ONLY.
*
to manufacturers published instructions. The outlet system will provide facility for connections to be made perpendicular to the inlet
shall provide mechanical joint connectors or requisite materials to connect the grease interceptor to the drainage system, additionally
making adequate provision for management of food debris and solids.
Interceptor shall be furnished with two (2) access covers, maximizing internal visibility for inspection and maintenance when removed.
These covers shall be capable of withstanding a proof load of 20,000lbs, approved for application at temperatures fr
om -20˚F to +100˚F
(-29˚C to +38˚C) and will be mechanically secured when operational.
The interceptor tank shall be constructed with seemless engineered thermoplastics, evaluated and approved to the material performance
requirements of CSA B481.0
The interceptor shall additionally; operate with an air-balanced environment to equalize variation in internal pressures being controlled
and maintained with an appropriately sized air balance means; be supported by a Lifetime Warranty against manufacturing defect.
❑
, 4044275A
❑
40442100AT
❑
, 4044275AT
❑
the interceptor, being vented and installed according to manufactures instructions and the currently published version of PDI G-101.
Interceptor will be located within 25ft developed pipe run of the last connected appliance for standard compliance. Where applicable
discharge appliances and the interceptor inlet.
Air Intake can be connected to building
vent system or be independently to the
atmosphere based on local code.
• Flow Control
• Flow Control
Pipe by
others
• Air Intake Tee
• Air Intake Tee
Connection
Iron Pipe Size
(Solvent weld)
4” h x h
A
6.13”
(155.7mm)
B
6.84”
(173.7mm)
C
-
4” h x h
3.19”
(81mm)
5.04”
(128mm)
2.72”
(69.1mm)
Capacities
External
Flow Control
Dimensions
For full CAD, BIM Models
and 3 Part Master Format
Specs visit www.arcat.com
Search keyword “endura”
CAD BIM SPECS
®
Endura XL75
Endura XL100
• Part Number
4075A04
4075A04M
40100A04
40100A04M
US Gallons Per Minute - GPM
(L/Sec)
75 (4.74)
100 (6.3)
A112.14.3)
>98%
>98%
Operating Temperature Capabilities
160˚F
(71˚C)
160˚F
(71˚C)
Cover Load Rating- CSA B481.0
S
10,000 lb (4536 kg)
M
2000 lb (907 kg)
S
10,000 lb (4536 kg)
M
2000 lb (907 kg)
CSA B481.0
Min. Test Load for Approval
S
20,000 lb (9072 kg)
M
4000 lb (1814 kg)
S
20,000 lb (9072 kg)
M
4000 lb (1814 kg)
Unit Weight (Empty)
233 lb
(106 kg)
283 lb
(128 kg)
Liquid Capacity
158 gal
(598 L)
257 gal
(973 L)
Connection size
(mechanical joint only)
4”
4”
Min. Grease Capacity - lb
(kg)
150 (68.2)
200 (90.8)
Grease Capacity Actual
(ASME A112.14.3) - lb
(kg)
†
NSF ES 15741
559 (253)
†
1058 (480)
†
