Status at:
January 2013
ESE 904 - 1304 DBG DIN
35
•
Fuel tank has been filled (see 4.3)
•
A possibly connected fuelling device (special accessory)
•
sufficient oil level (fill with engine oil before initial use,
see the engine operating and maintenance instructions)
•
ventilation must be adequate.
•
Fit push-on exhaust gas pipe (special accessory) if
needed
•
a connected and operational starter battery
•
appliances switched off or disconnected
WARNING!
Operating fluids can burn or explode.
•
Prevent leaking of engine oil and petrol.
•
Do not use starting aids.
•
Avoid open flames and sparks.
WARNING!
Exhaust gases can cause fatal asphyxiation.
•
Provide for sufficient ventilation.
•
Use an exhaust gas pipe.
•
Only operate the alternator outdoors.
WARNING!
Hot parts can ignite flammable and explosive materials.
•
Avoid flammable materials at the operating site.
•
Avoid explosive materials at the operating site.
WARNING!
Heat or moisture destroys the device.
•
Avoid overheating (sufficient ventilation).
•
Avoid moisture.
Start the engine as follows:
Starting the motor
Summary of Contents for ESE 1104 DBG ES FS DIN
