Endress ESE 1104 DBG ES FS DIN, Operating Instructions Manual

Page: 58 / 88

58
ESE 904 - 1304 DBG DIN Status: at January 2013
The charge conservation device is disconnected
Connect up the battery charge conservation device
(charge current socket BEOS) as follows:
Fig. 5-8: Connecting up the battery charge conservation device
1. Unscrew cover
(Fig. 5-7-(2))
for socket
(Fig. 5-7-(1))
for the
starter battery charge conservation device.
2. Insert plug for the external energy source (e.g. a battery
charging device) / charge conservation device socket
connecting cable and lock in place by turning to the right.
The battery charge conservation device is ready to oper-
ate.
Disconnect the battery charge conservation device as
follows:
1. Release the plug by turning to the left and then pull the
plug for the external energy source (e.g. a battery charg-
ing device) / charge conservation device socket connect-
ing cable out.
2. Screw on protective cap
(Fig. 5-7-(2))
for charge conserva-
tion device socket.
The charge conservation device is disconnected
Connecting up the battery
charge conservation
device