Endress ESE 1104 DBG ES FS DIN, Operating Instructions Manual

Page: 66 / 88

66
ESE 904 - 1304 DBG DIN Status: at January 2013
6.2 Maintenance work
Only authorised personnel may carry out maintenance tasks.
Perform all work in the maintenance plan according to the
information in the engine's operating and maintenance man-
ual
(Fig. 3-5-(2))
. These operating and maintenance instruc-
tions of the engine manufacturer are an integral component
of these operating instructions.
6.2.1 Charge battery
Charge the battery according to the handling regulations
supplied by the manufacturer (see 1.1) in order to maximise
service life.
6.2.2 Replacing the starter battery
1. Unscrew the battery holder
(Fig. 6-1-(1))
.
2. Remove the battery
(Fig. 6-1-(2))
from the battery com-
partment.
3. Unscrew the battery cable. Push the protective terminal
caps back for this purpose and loosen the screws. Al-
ways disconnect the cable from the NEGATIVE terminal
first and then disconnect the cable from the POSITIVE
terminal.
Battery is disconnected.
Fig. 6-1: Replacing the battery
4. Prepare a new battery.
Important