Endress ESE 1104 DBG ES FS DIN, Operating Instructions Manual

Page: 56 / 88

56
ESE 904 - 1304 DBG DIN Status: at January 2013
5.5 External start device
Proceed as follows to operate the generator using the exter-
nal start device.
The following requirements must be met:
•
generator has been started (see 4.4)
Fig. 5-6: Connecting up an external start device
Connect up the external start device as follows:
1. Unscrew cover
(Fig. 5-6-(2)
on the external start socket
(Fig.
5-6-(1))
.
2. Insert plug for the external energy source connecting
cable (e.g. starter battery) / external start socket into the
external start socket and lock in place by turning to the
right.
External start device is ready for use.
The engine can be started using the electrical start.
Disconnect the external start device as follows:
1. Release the plug by turning to the left and then pull the
external energy source / external start socket plug out.
2. Screw protective cap for the external start socket back on
again.
External start device is disconnected.
Requirements
Connecting up an external
start device
Disconnecting the external
start device