Status at:
January 2013
ESE 904 - 1304 DBG DIN
39
These requirements must be met:
•
generator started
•
protective earthing conductor tested
•
device switched off
WARNING!
Electric shocks cause injury or death.
•
Do not earth the generator.
•
Do not connect protective conductor to an existing po-
tential equalisation line.
•
Do not connect the generator to an existing electrical
grid.
You can connect devices using Schuko or CEE sockets.
Fig. 4-4: Connecting up consumers/appliances
Proceed as follows to connect a device to the control
panel:
1. Unscrew covering on the socket .
2. Push the plug into the socket.
The device is connected to the generator.
Requirements
Connecting up
consumers/appliances
Connecting up
consumers/appliances
Summary of Contents for ESE 1104 DBG ES FS DIN
