12
ESE 904 - 1304 DBG DIN
Status: at
January 2013
The following actions are not permitted.
•
Operation in explosion-prone environments
•
Operation in fire-prone environments
•
Operation in confined areas
•
Operation from a vehicle platform that has not been
swung out
•
Operation without the necessary safety redundancies
•
Operation in existing power supply networks
•
Refuelling when hot
•
Refuelling during operation
•
Spraying
with
high-pressure
cleaners
or
fire-
extinguishing equipment
•
Safety equipment removal
•
Incorrect vehicle installation
•
Non-compliance with maintenance intervals
•
Failure to measure and test for early damage identifica-
tion
•
Failure to replace wearing parts
•
Incorrectly performed maintenance or repair work
•
Defectively performed maintenance or repair work
•
Unintended use
2.2 Intended use
The generator produces electricity in place of the power grid,
in order to supply a mobile distribution system.
The generator may only be used outdoors within the indicat-
ed voltage, output, and nominal rpm ranges (see model
plate).
You are also permitted to use it on a vehicle extension or
swivelling platform in both extended and swung out states,
providing that the air circulation is uninterrupted on all sides
of the alternator and that the exhaust gases are dispersed
correctly. This is especially relevant as access to the side
with the instrument panel and the side with the exhaust gas
connection must be unrestricted.
The methods that will be used to install the generator on the-
se surfaces of a vehicle require written approval from the
distributor that supplied the generator.
Summary of Contents for ESE 1104 DBG ES FS DIN
