Endress+Hauser Liquisys M CCM223, Operating Instructions Manual

Page: 9 / 124

Liquisys M CCM223/253 Mounting
Hauser 9
3 Mounting
3.1 Quick installation guide
Proceed as follows to completely install the measuring point:
• Install the transmitter (see "Installation instructions" section).
• If the sensor is not yet installed in the measuring point, install it (see Technical
Information of the sensor).
• Connect the sensor to the transmitter as illustrated in the "Electrical connection" section.
• Connect the transmitter as illustrated in the "Electrical connection" section.
• Commission the transmitter as explained in the "Commissioning" section.
3.1.1 Measuring system
A complete measuring system comprises:
Version 1 (free chlorine and chlorine dioxide)
• The transmitter Liquisys M CCM223 or CCM253
• A membrane covered sensor CCS140/141 for Cl
2
or CCS240/241 for ClO
2
or an open
sensor 963 for Cl
2
• A flow assembly CCA250 (not necessary for sensor 963)
and optional:
• A pH or ORP sensor
• An INS proximity switch for flow monitoring (omitted with 963 sensor)
• CMK extension cable for chlorine measurement if required
• CYK71 extension cable for pH/ORP measurement if required
• MK extension cable for INS proximity switch if required
• VBC junction box
Version 2 (total chlorine)
• The transmitter Liquisys M CCM223 or CCM253
• A sensor for total chlorine CCS120
• A flow assembly CCA250 or immersion assembly CYA611
• A special measuring cable CPK9, PM wire internally
and optional:
• A pH or ORP sensor
• An INS proximity switch for flow monitoring (omitted with immersion assembly)
• CMK extension cable (PM wire internally) for chlorine measurement if required
• CYK71 extension cable for pH/ORP measurement if required
• MK extension cable for INS proximity switch if required
• VBC junction box