
Liquiline CM44P
Operation
Hauser
69
Menu/Setup/General settings/Logbooks
Function
Options
Info
Line plotter
Menu to define the graphic display
Axes
Selection
• Off
• On
Factory setting
On
Should the axes (x, y) be displayed (
On
) or not
(
Off
)?
Orientation
Selection
• Horizontal
• Vertical
Factory setting
Horizontal
You can choose whether the value curves should
be displayed from left to right (
Horizontal
) or
from top to bottom (
Vertical
). If you want to
display two data logbooks simultaneously, make
sure that both logbooks have the same settings
here.
X-Description
Selection
• Off
• On
Factory setting
On
‣
Decide whether a description should be
displayed for the axes and whether gridlines
should be shown. In addition, you can also
decide whether pitches should be displayed.
Y-Description
Grids
Pitches
X Pitch/Grid distance
10 to 50%
Factory setting
10 %
‣
Determine the pitch.
Y Pitch/Grid distance
Remove
Action
This action removes the data logbook. Any data
that have not been saved are lost.
Example: New data logbook (Setup/General settings/Logbooks/Data logbooks/New)
1. Make the settings:
• Logbook name
Assign a name. Example: "01".
• Source of data
Select a data source. Example: Sensor connected to channel 1 (CH1).
• Measured value
Select the measured value to be recorded. Example: pH value.
• Scan time
Specify the time interval between two logbook entries.
• Data logbook
Activate the logbook: specify the data storage method.
2. ../
Finished
: Perform the action.
The device shows the new logbook in the list of data logbooks.
3. Select data logbook "01".
Additional display:
Log time left
.
4. Only in the case of
Fill up buffer
:
Decide to set
Overflow warning
:
On
or
Off
.
On
: The device displays a diagnostic message in the event of memory overflow.
5.
Line plotter
submenu: Specify the type of graphic representation.