Endress+Hauser Hart Proline Promag P 500, Operating Instructions Manual, Page: 33 / 210

Proline Promag P 500 HART Installation
Hauser 33
Screw tightening torques for JIS B2220, 10/20K
Nominal diameter Pressure rating Screws Nom. screw tightening torque [Nm]
[mm] [bar] [mm] PUR HG
350 10K 16 × M22 109 109
350 20K 16 × M30×3 217 217
400 10K 16 × M24 163 163
400 20K 16 × M30×3 258 258
450 10K 16 × M24 155 155
450 20K 16 × M30×3 272 272
500 10K 16 × M24 183 183
500 20K 16 × M30×3 315 315
600 10K 16 × M30 235 235
600 20K 16 × M36×3 381 381
700 10K 16 × M30 300 300
750 10K 16 × M30 339 339
Screw tightening torques for AS 2129, Table E
Nominal diameter Screws Max. screw tightening torque
[Nm]
[mm] [mm] PTFE
25 4 × M12 21
50 4 × M16 42
Screw tightening torques for AS 4087, PN 16
Nominal diameter Screws Max. screw tightening torque
[Nm]
[mm] [mm] PTFE
50 4 × M16 42
6.2.4 Mounting the transmitter housing: Proline 500 – digital
L
CAUTION
Ambient temperature too high!
Danger of electronics overheating and housing deformation.
‣
Do not exceed the permitted maximum ambient temperature →  26.
‣
If operating outdoors: Avoid direct sunlight and exposure to weathering, particularly in
warm climatic regions.
L
CAUTION
Excessive force can damage the housing!
‣
Avoid excessive mechanical stress.
The transmitter can be mounted in the following ways:
• Post mounting
• Wall mounting