4 Wiring
ASP station 2000
70
EHauser
4.1.6
Connecting the RS232 interface (standard)
The standard version contains an RS232 as a service interface. Remove the controller
as follows.
Fig. 11:
Connecting a standard RS232 (interface behind controller)
A PC (9-pin SUB-D plug) is connected to the connection socket (3.5 mm, jack socket)
for the RS232 digital interface using the RS232 interface cable (3.5 mm, jack plug). The
Hauser device software ReadWin 2000 allows remote configuration and
measuring data polls.
Fig. 12:
Pin assignment of RS232 interface cable
4.1.7
Connecting an RS232 interface (option -> see Fig. 2,
item g)
The ASP station 2000 is optionally available with an outer RS232 interface.
Fig. 13:
Connecting RS232 option with outer interface
1. Loosen the
fixing screws.
2. Pull the controller
forwards.
3. RS232 plug
behind front panel.
1
2
3
5
3
2
1
4
6
7
8
n.c.
n.c.
n.c.
9
n.c.
n.c.
RxD
TxD
Gnd
Screened wire
9-pin socket
RS232 interface
on front panel
