Section 8: programming Measurements
Instruction Manual
April 2017
LIQ-MAN-1066
54
Programming Measurements
Measure
The display screen for selecting the measurement is shown. The default
value is displayed in bold type. Refer to the Chlorine Programming flow
diagram to complete this function.
Units
The display screen for selecting units as ppm or mg/L is shown. The
default value is displayed in bold type. Refer to the Chlorine
Programming flow diagram to complete this function.
Filter
The display screen for entering the input filter value in seconds is shown.
The default value is displayed in bold type. Refer to the Chlorine
Programming flow diagram to complete this function.
Free Chlorine pH Correction
The display screen for Selecting Live/Continuous pH correction or
Manual pH correction is shown. The default value is displayed in bold
type. Refer to the Chlorine Programming flow diagram to complete this
function.
Manual pH Correction
The display screen for manually entering the pH value of the measured
process liquid is shown. The default value is displayed in bold type. Refer
to the Chlorine Programming flow diagram to complete this function.
Resolution
The display screen for selecting display resolution as 0.001 or 0.01 is
shown. The default value is displayed in bold type. Refer to the Chlorine
Programming flow diagram to complete this function.
8.6.1.1
8.6.1.2
8.6.1.3
8.6.1.4
8.6.1.5
8.6.1.6
1.234 µS/cm 25.0 ºC
S
N
Measurement
Free Chlorine
Total Chlorine
Monochloramine
1.234µS/cm 25.0ºC
S
N
Units
ppm
mg/L
1.234 µS/cm 25.0 ºC
S
N
Input filter
05 sec
1.234 µS/cm 25.0 ºC
S
N
Manual pH
07.00 pH
1.234 µS/cm 25.0 ºC
S
N
Resolution -
0.001
0.01
1.234 µS/cm 25.0 ºC
S
N
Free Cl
pH Correction
Live/Continuous
Manual