116
HART Communications
2.2.4. Measurement (1066 Ozone)
2.2.4.1. PV Unit
2.2.4.2. Resolution
2.2.4.3. Input Filter
2.2.4.4. Filter Type
2.2.4.5. Polar Voltage
2.2.4.6. Temp Coefficient
2.2.5. Measurement (1066 Chlorine)
2.2.5.1. Measurement Type
2.2.5.2. PV Unit
2.2.5.3. Resolution
2.2.5.4. pH Correction (Free Chlorine Measurement Type only)
2.2.5.4.1. pH Correction
If pH Correction is manual
2.2.5.4.2. Manual pH
If pH Correction is Live/Continuous
2.2.5.4.3. Preamp Location
2.2.5.4.4. Resolution
2.2.5.4.5. Sensor Isopotential
2.2.5.4.6. Soln Temp Correct’n
2.2.5.5. Input Filter
2.2.5.6. Filter Type
2.2.5.7. Polar Voltage
2.2.5.8. Temp Coefficient
2.2.6. Measurement (1066 Contacting & Torridal Conductivity)
2.2.6.1. Measurement Type
2.2.6.2. PV Unit
2.2.6.3. Sensor Config
2.2.6.3.1. Sensor Type (Contacting Model)
2.2.6.3.2. Sensor Model (Toroidal Model)
2.2.6.3.3. Range
2.2.6.3.4. Cell Constant
2.2.6.3.5. Cell Factor (4-Electrode)
2.2.6.3.6. RTD Offset (Cell Constant < 0.02)
2.2.6.3.7. RTD Slope (Cell Constant < 0.02)
2.2.6.4. Setup Custom Curve (Custom Curve Measurement)
2.2.6.5. Temp Comp
2.2.6.5.1. Temp Comp Type
2.2.6.5.2. Temp Slope
2.2.6.5.3. Reference Temp
2.2.6.6. Cable Correction (2-Electrode or Toroidal)
2.2.6.6.1. Series Cap Corr
2.2.6.6.2. Cable R. Correction
2.2.6.6.3. Cable Resistance
2.2.6.7. Input Filter
2.2.6.8. Filter Type
2.2.7. Temperature
2.2.7.1. Temperature Unit
2.2.7.2. Temp Comp
2.2.7.3. Manual Value (If Temp Comp is Manual)
2.2.8. analog Outputs
2.2.8.1. Output 1
2.2.8.1.1. Primary Variable
2.2.8.1.2. PV URV
2.2.8.1.3. PV LRV
2.2.8.1.4. Scale
2.2.8.1.5. Dampening
2.2.8.1.6. Fault Mode
2.2.8.1.7. Fault Value
Section 10: haRT Communication
Instruction Manual
April 2017
LIQ-MAN-1066
