PACSys
tems™ Industrial Displays User Manual
Section 1
GFK-3138B
Jul 2021
Introduction
5
1.3.4
Configuration and Setup RXi Industrial Monitor
On-Screen Display (OSD)
AD Board OSD Functions
Figure 4: AD Board OSD Functions Legend
Auto-Adjust Up/Left Down/Right Power
Menu/Entry Power Indicator
Power switch: To turn ON or OFF the power
Shift the icon to the left side or shift it up
Shift the icon to the right side or shift it down
Menu: To enter the OSD menu for related icon and item
Auto Button: One-touch auto adjustment
Enter Burn-in Mode
Before entering the burn-in mode, first, disconnect the AC power cord, then press and hold the
buttons, then release after the AC power cord is connected and the RGB appears on the top left corner
of your screen. Now it can be put into the burn-in mode for changing colors.
Exit Burn-in Mode
Before exiting burn-in mode, please first disconnect the AC power cord, then press the
button (If for
any reason this button is non-functional, press and hold the
button) until the AC power cord is
connected. Do not release the button until the AC power cord is connected again and the wording of
RGB appears on the top left corner of your screen, then wait for 3 seconds. If there is no input plugged
into the unit, the CABLE NOT CONNECTED message will denote that it has successfully left burn-in
mode.
