PACSys
tems™ Industrial Displays User Manual
Section 1
GFK-3138B
Jul 2021
Introduction
27
Chipset
This section configures relevant chipset functions.
Figure 30: Chipset Screen
BIOS Parameter
Description
OnChip SATA Channel
Enable or disable Serial ATA
OnChip SATA Type
Select OnChip SATA Type: Native IDE, AHCI, or Legacy IDE.
SD Mode
Enable or disable Secure Digital (SD) Mode configuration.
SD Host Controller Version
Select Secure Digital (SD) host controller version: SD2.0 or SD3.0.
HD Audio
HD Audio will be enabled if present, disabled otherwise.
Restore on AC Power Loss
Power On
–
When Power returns after an AC power failure, the
system will automatically power-on.
Power Off - When power returns after an AC power failure, the
system will remain off. You must press the Power button to power
on the system.
Last State - When power returns after an AC power failure, the
system will return to the state where you left off before power
failure occurs. If the system’s power is off when AC
power failure
occurs, it will remain off when power returns. If the system’s
power is on when AC power failure occurs, the system will power-
on when power returns.
GPP2 Hotplug Mode Control
Enable or Disable GPP2 Hotplug Mode Control
GPP3 Hotplug Mode Control
Enable or disable GPP3 hotplug mode control.
DP0 Output Mode
Select NB PCIe to connect type (display device): EDP or Disabled.
Dp1 Output Mode
Select NB PCIe connect type (display device): DP or Disabled
Auto Backlight Dimming
Enable or disable dimming backlight by TB573D.
Minimum Dimming Level
Set the minimum dimming level control. The range is 1~20%.
