PACSystems™ Industrial Displays User Manual
Section 3
GFK-3138B
Jul 2021
Hardware
81
I/O Connectors
Serial ATA (SATA) Connector
Features
•
1 Serial ATA 3.0 port with data transfer rate up to 6Gb/s
•
Integrated Advanced Host Controller Interface (AHCI) controller
The Serial ATA connector is used to connect the Serial ATA device. Connect one end of the Serial ATA
data connector to a SATA connector on the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drive
in the Chipset menu (“SB SATA Configuration” submenu) of the BIOS.
Refer to chapter 3 for more information.
Expansion Slots
Micro SD Socket
The micro SD socket allows you to install a micro SD card for the expansion of available storage.
LVDS LCD Panel Connector
The system board allows you to connect an LCD Display Panel with the LVDS LCD panel connector. This
connector transmits video signals and power from the system board to the LCD Display Panel.
Refer to the right side for the pin functions of the LVDS connector.
BIOS Setting
Configure the LCD panel in the Chipset menu (“DISPLAY control” submenu) of the BIOS. Refer to
Chapter 3 for more information.
AIO/DIO Connector
AIO/DIO connector provides functionality to external devices that are connected to the connector.
(FOR FUTURE USE)
