PACSys
tems™ Industrial Displays User Manual
Section 1
GFK-3138B
Jul 2021
Introduction
52
Save & Exit
Figure 52: Save & Exit'
BIOS Parameter
Description
Save Changes and
Reset
To save the changes, select this field and then press <Enter>. A dialog box will
appear. Select Yes to reset the system after saving all changes made.
Discard Changes
and Exit
To discard the changes, select this field and then press <Enter>. A dialog box
will appear. Select Yes to reset the system setup without saving any changes
Restore Defaults
To restore and load the optimized default values, select this field and then press
<Enter>. A dialog box will appear. Select Yes to restore the default values of all
the setup options
Updating the
BIOS
To update the BIOS, you will need the new BIOS file and a flash utility. Please
contact technical support or your sales representative for the files.
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility. Please contact technical support
or your sales representative for the files.
Note: BIOS SPI ROM
1.
Due to safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system board and
used on another system board of the same model.
2.
The BIOS (SPI ROM) on this system board must be the original equipment from the factory and
cannot be used to replace one which has been utilized on other system boards.
3.
If you do not follow the methods above, the Management Engine will not be updated and will cease
to be effective.Installation of Drivers