PACSys
tems™ Industrial Displays User Manual
Section 1
GFK-3138B
Jul 2021
Introduction
6
If unable to exit Burn-in Mode
If the RGB is still on the top left corner of the screen, press
to enter Miscellaneous and choose Reset,
and then select Yes, and press
. When the screen goes black, disconnect power and repeat the above
steps.
If the RGB is not found, disconnect the AC power cord first, then press and hold the
buttons until
the AC power cord is connected, and wait for 2 to 3 seconds. When RGB appears, repeat the above steps.
OSD Controls
OSD Keypad
To make any adjustment to the settings of the Industrial Monitor, select the following:
1.
Press
(Menu) to show the OSD menu or dismiss the OSD menu.
2.
Select the icon that you wish to adjust with the (
/
) key in the menu.
3.
Press
(Menu) and then choose the item with the (
/
) key.
4.
Press
(Menu) and then adjust the quality with the (
/
) key.
Virtual OSD Keypad
1.
Press Menu to show the OSD menu or dismiss the OSD menu.
2.
Navigate to the icon that you wish to adjust with the (+) and (-) keys in the menu.
3.
Press Menu and then choose the item with the (+) and (-) keys.
4.
Press Menu and then adjust the quality with the (+) and (-) keys
Figure 5: Virtual OSD Keyboard
